Catch up on our weekly Training Tuesday videos

To help bring the classroom to installers, wherever they are, we've made short videos on a range of topics from servicing, maintenance to installation and repairs to share on our social media channels.

Every Tuesday at 12 noon, one of our knowledgeable trainers will be sharing their top tips and advice, and at no more than a minute long, even the busiest installer can find time to watch.

For nuggets of wisdom to make working on your favourite boilers even easier, follow us on our social channels:

Twitter @baxiboilers
Instagram @baxiboilers
Facebook @baxiuk

Don't do social media? Check back here each Tuesday for a new video.

Of course, there's no substitute for getting hands on and 'learning by doing', so if you like what you see and want to learn more, book on to one of our free product or specialist training days at our centres throughout the UK.

Book now

Please note: This video is intended for Gas Safe registered engineers only and is subject to our full video disclaimer which can be found here.

#TrainingTuesday

Richard Green shows you how to test thermistors in perfect and imperfect scenarios

Previous videos

Click to play video

#TrainingTuesday 1 - The air pressure switch on the Baxi Duo-tec and Baxi Platinum Combi ranges >

Click to play video

#TrainingTuesday 2 - De-aeration of the heat exchanger on the Baxi 600 Combi >

Click to play video

#TrainingTuesday 3 - A simple check for identifying a primary flow switch fault on the Potterton Promax SL Heat only boiler >

Click to play video

#TrainingTuesday 4 - Top tip on how to check if the pump is running without taking the case off >

Click to play video

#TrainingTuesday 5 - Checking the combustion box door seal on the Baxi Duo-tec and Baxi Platinum Combi ranges whilst servicing the boiler >

Click to play video

#TrainingTuesday 6 - Top tip to help you when you're installing the Baxi 600 Combi >

Click to play video

#TrainingTuesday 7 - A simple check on how to diagnose E133 lockout on the Baxi 600 Combi >

Click to play video

#TrainingTuesday 8 - Keeping the boiler cool during commissioning the Baxi Duo-tec and Baxi Platinum Combi ranges >

Click to play video

#TrainingTuesday 9 - Top tip on replacing the diverter valve cartridge on the Baxi Duo-tec and Baxi Platinum Combi ranges >

Click to play video

#TrainingTuesday 10 - A simple check on how to diagnose E117 fault on a Baxi EcoBlue Combi and Baxi EcoBlue Advance Combi >

Click to play video

#TrainingTuesday 11 - Top tip on removing a plate to plate heat exchanger on a Baxi 600 Combi >

Click to play video

#TrainingTuesday 12 - Top tip on how to gain access to the Schrader valve of the expansion vessel of the Baxi Duo-tec and Baxi Platinum Combi ranges >

Click to play video

#TrainingTuesday 13 - Top tip when checking the pump for circulation on the Baxi Duo-tec and Baxi Platinum Combi ranges >

Click to play video

#TrainingTuesday 14 - Top tip on how you can test the hall affect sensor without a mult-meter on the Baxi Duo-tec and Baxi Platinum Combi ranges >

Click to play video

#TrainingTuesday 15 - The boiler connections on the Baxi 600 Combi >

Click to play video

#TrainingTuesday 16 - Top tip on how you put the Baxi 600 Combi into the service function (commonly know as the chimney sweep mode) and how you would keep the boiler cool if all the radiators were already hot >

Click to play video

#TrainingTuesday 18 - The correct procedure for re-pressurising the expansion vessel >

Click to play video

#Training Tuesday 19 - Persistent system pressure loss fault >

Click to play video

#TrainingTuesday 20 - How to detect if the expansion vessel Schrader valve is leaking and how to replace it >

Click to play video

#TrainingTuesday 21 - How to check if the fan is going on the Baxi Heat only range of boilers >

Click to play video

#TrainingTuesday 22 - Ian Trott explains the effects of weather compensation and setting the curve setting on a Baxi 600 boiler >

Click to play video

#TrainingTuesday 23 - Rob Evans demonstrates how to do a flue integrity check on the Baxi Solo heat only boiler >

Click to play video

#TrainingTuesday 24 - Rob Evans shows you a handy tool for checking output from the spark generator on the Baxi Duo-tec and Baxi Platinum boilers >

Click to play video

#TrainingTuesday 25 - Rob Evans takes you through how to recognise a zone valve that can be taken apart Vs one that can't, saving you time and money when conducting work on a system >

Click to play video

#TrainingTuesday 26 - Roy Fugler gives you an introduction to Information Mode explaining the different functions and how you we might use them on the Baxi Duo-tec and Baxi Platinum boilers >

Click to play video

#TrainingTuesday 29 - James Hodgson shows you how to easily remove the lip seal from the hydraulic block on the Baxi Duo-tec and Baxi Platinum boilers >

Click to play video

#TrainingTuesday 30 - James Hodgson shows you how to 'not' lose the injector when removing the gas/air unit from Baxi Duo-tec and Baxi Platinum boilers >

Click to play video

#TrainingTuesday 31 - Dave Driver demonstrates a helpful check you can make to prove ignition on the Baxi Duo-tec and Baxi Platinum boilers even when E133 is displayed and the flame symbol is not illuminated >

Click to play video

#TrainingTuesday 32 - Dave demonstrates a handy feature on Baxi 600 when changing any potentially wet components >

Click to play video

#TrainingTuesday 33 - Checking the gas inlet working pressure in relation to error code E133, demonstrated on a Baxi 600 >

Click to play video

#TrainingTuesday 34 - Richard Green talks about Grundfos UPM3 pumps and shows you how they can be turned in the event of being clogged with debris >